LEAD-JST-XH3: JST-XH 3 pin lead (single unit)

Hello folks from Ultimate RC... just to clarify, the connection type is just JST XH, but my addition of the 3 on the end (without the space) is a matter of convenience. Of course, normal people will know JST-XH3 is referring to a JST-XH connection with 3 ways. . . note below to see I actually clarify... Enjoy! :D

JST-XH 3 pin connector supplied with 100mm of lead and tinned ends. This lead can be used to add balancing ports to your existing lipo packs or make adapters for your chargers.

The JST-XH connector is used on the Elegance range of lipo batteries and is the connector used on the new GWS C3-LP lipo charger.

LEAD-JST-XH4: JST-XH 4 pin lead (single unit)

JST-XH 4 pin connector supplied with 100mm of lead and tinned ends. This lead can be used to add balancing ports to your existing lipo packs or make adapters for your chargers.

The 4 pin lead can be used for 3S lipo packs.

The JST-XH connector is used on the Elegance range of lipo batteries and is the connector used on the new GWS C3-LP lipo charger.

LEAD-JST-XH5: JST-XH5 type lead (single unit)

JST-XH 5 pin connector supplied with 100mm of lead and tinned ends. This lead can be used to add balancing ports to your existing lipo packs or make adapters for your chargers.

LEAD-JST-XH6: JST-XH6 type lead (single unit)

JST-XH 6 pin connector supplied with 100mm of lead and tinned ends. This lead can be used to add balancing ports to your existing lipo packs or make adapters for your chargers.

LEAD-JST-XH7: JST-XH7 type lead (single unit)

JST-XH 7 pin connector supplied with 100mm of lead and tinned ends. This lead can be used to add balancing ports to your existing lipo packs or make adapters for your chargers.

PLD-ADP-001: 2S adapter lead for Normaliser

This adapter lead will let you plug a 2S pack into the PLD-LN3S Normaliser

WFM-JR-30: Servo plug extention lead (Female)

300mm long servo extention lead with bare wires at one end and 3 pin socket at other end (like receiver connections).

WIRE-2PN-254P-200MM: 2 pin, 2.54mm pitch, 200mm length (single unit)

These 2 pin wire assemblies have a standard 0.1" / 2.54mm pitch with a red + black lead and tinned bare wire at the other end. These leads have been specifically provided to couple with the Programmable strobe, though they can be used for many other applications.

WIRE-JST-FEMALE: JST Female on 150mm lead

150mm long power lead fitted with JST female connector. 22AWG wire. Recommended maximum current 5A.

WIRE-JST-MALE: JST Male on 150mm lead

150mm long power lead fitted with JST male connector. 22AWG wire. Recommended maximum current 5A.

WIRE-SERVO-BARE: Bare 3 core servo lead (per meter)

Use this lead to make up servo extentions or data links. Sold in 1 metre units.

WIRE-SERVO-EXT-300: 24AWG Servo extention lead, 300mm

Fitted with a male and female 3 pin servo connector, these 300mm long extension leads are very useful for when you need to move that servo down the wings or tail a bit further. 24AWG.

WIRE-SERVO-EXT-600: 24AWG 600mm servo extension lead

Fitted with a male and female 3 pin servo connector, these 600mm long extension leads are very useful for when you need to move that servo down the wings or tail a bit further. 24 AWG.

WIRE-SERVO-FM-150: Servo socket lead, 150mm, female

150mm long servo type lead with female socket. Ideal for making small extensions or repairing existing devices

WIRE-SERVO-M-BARE-300: Male servo lead, 300mm

These servo leads can be used either for your own projects, battery adapters or replacing existing broken leads. The wire is 26 gauge and 300mm long.

WIRE-YLEAD-150: Y-splitter lead, 75mm per leg

Useful for symmetrical servo configurations or when you need to split a single channel into two. Each leg of the Y lead is 75mm long so as to not fill up your fuselage with unwanted lengths of wire.